Microchip controlled professional firing systems for fireworks


Power supply - yeach power supply is recommended at 12V DC. It can be a battery or another type of DC power source. We recommend 12V DC lead-acid maintenance-free batteries, 1.2Ah at a minimum. These are relatively cheap and can supply the unit with power for many days in idle mode.

E-match check - After switching on the module, the unit does e-match test (continuity check) and displays the status on the cue's LEDs. After five seconds the LEDs switch off and the module is ready to use.

MerlinEasy firing module

The following controls are shown on this firing module:

Small plastic case (size 110x155x35 mm), small aerial antenna with a standard BNC connector is provided so you can use high-gain antenna with coaxial cable.

firing module A